Untitled 0

New Cedar Homes

Coat weatherboards yourself before or during construction or have a machine coating company coat them for you and deliver to your site.

We recommend leaving the second CD50 application until after all landscaping and driveway work is complete. Dirt stirred up during these operations may land on CD50 coated surfaces and produce a patchy and blackened appearance if CD50 were reapplied over it. Cedar and any timber to be coated with CD50 should be lightly washed with SARAClean if it has been exposed to high levels of contamination during construction and landscaping.

Applications to New Cedar

Weatherboards
Board & Baton
Beams
Posts
Poles
Decks
Fences

Common Timber Types

Western Red Cedar
Yellow Alaskan Cedar

Timber Preservation

CD50

Used on timber 100mm thick or less.
For weatherboards apply CD50 to all sides and ends prior to to installation. Coat cut ends prior to installation.
Apply second coat of CD50 at least 2 months after installation and all dirt work around the building has finished i.e. landscaping, driveways, gardens etc. A light SARAClean wash may be required to remove dirt accumulated since the first CD50 application.

CD50LOG

Used on timber 100mm thick or greater.
Beams, joists, bearers, poles, posts, slab garden furniture, retaining walls, sculptures & carvings etc.

AP5

Newly felled timber with high levels of internal moisture or sap.

Timber Preparation

SARAClean

Used to clean silvered, dirty, mouldy and black timber surfaces in preparation for applying CD50

WAY2Go

Used to remove stains that SARAClean cannot remove.